5 layer Plastic Blow Molding Machine for food container source
bottle
Brief introduction
Mold clamping structure adopting advanced four shafts to clamp the
mold ,Can clamp the mold firmly ,stable and reliable ,central mold
platen is provided with protruding structure ,binging convenience
to installing and dismantling molds, making the design human
friendly
Piling out system adopting high performance transducer to drive
,saving power by above 30%,can be equipped with 100points wall
,thickness control ,Adopting foreign famous brand MOOG, improving
the uniformity of the finished products ,lowering the weight of the
finished products ,Flow and pre-sure proportional control valve.
consuming less power ,high output ,of high performance price Ratio.
With self-functioned and stable PLC control system ,as well as the
integrative of the machine ,electric devices and hydraulic digital
controlled and temperature control of PID have been achieved ,The
equipment’s operation speed and stability have been greatly
improved ,Friendly operational panel ,easy, convenient
Shaft insertion structure can work with many models of machines
with many die head ,of standardized design ,easy to adjust
,accurate of body separate shaft head design ,can be replaced
easily ,high quality products
Advantage:
Machine specification:
MP70/80FD-1-5LAYER
5Layer single head
| Parameters | MP80FD |
| Material | PE PP PVC PA… |
| Max container capacity | 10L |
| Number of die | 1,2,3,4,6 |
| Machine Dimension(LxWxH) | 3.3x5.5x2.8m |
| Total weight | 12ton |
| Clamping force | 150kN |
| Platen openning stokes | 240-620mm |
| Toggle stokes | 600mm |
| Max mould size(WxH) | 550x430mm |
| Screw diameter | 80mm |
| Screw L/D ratio | 24 L/D |
| (HDPE) Plasticizing capacity | 108kg/h |
| Screw heating zone | 4 zone |
| Screw heating power | 15.6kw |
| Screw fan power | 0.14kw |
| Extrusion motor power | 30kw |
| Die head heating zone | 8 zone |
| Power of die heating | 10.3kw |
| Total power of machine | 92kw |
| Power of oil pump motor | 31kw |
| Air pressure | 0.6-0.8 Mpa |
| Average energy consumption | 61kw |
| Consumption compression air | 1.2m³/min |
| Consumption cooling water | 80L/min |
Standard Features:
Auto Lubrication
Water Cooled Modular Blow Pin
Hot Wire Cutting
Positioning Hole For Quick Mold Change
Adjustable Die head
Linear Transducer
FRL(Filter Regulator Lubricator) for Pneumatic
Proportional Hydraulic System fro better control
Swing and Adjustable Extrusion Platform
