Single station toggle clamping system Extrusion Blow Molding
Machine for daily chemical bottle
Brief introduction:
MP70FS is one of the most popular model for products below 5L
View strip optional
co-extrusion(multi-layer)optional
Double station or Single sation optional
Advantage:
1. adopt four position leader structure and supporting grider design,
it is good at stability.
2. carriage moving design adopts tie-bar and linear guide,heavy and
stong structure design make sure machine works more faster ,smooth
and stable in fast cycle.
3. copper meatus connection between the platen and carriage,
self-detector distribute installed,make sure machine lubrication
system are in super good condition.
4. adopt double proportional valve in hydraulic system, it is
high-efficiency in production and low vibration in pressure.
5. special protection for the machine and people
Sensor in the operating door: if anybody enter the machine,the
electricity conneced with the machine will automatic cut down.
Temperature interlock system:When the material inside the barrel is
not reaching the setting temperature,the extrusion motor can never
start.that will help the screw and head of the machine.
6. easy die head dis-assemble and assemble
7. adopt and prefer to use seamless and stainless meatus in
hydraulic connection design from valve mainifoild to oil cylinder.
compare to pipes,it is more stable to avoid oil leakage.
Center distance introduction:
Double head standard Center distance:160mm (170,180,200mm as
option)
Thriple head standard center distance:120mm(100,120,125,130mm as
option)
Four head standard center distance:100mm(90mm as option)
Six head standard center distance:60,70mm
Mainly applicable field:
a) Pharmacy packing and cosmetic field:including madicin bottles,
eyedrop bottles,cosmetic bottles.
b) Auto parts: air-contidional pipes,oil tank,water tank,hollow
parts from the auto.
c) Food and beverage packing:beverage bottles(milk container,juice
bottles ,jar)
d) Oil and chemical field: petrol jars,oil barrel,painting buckets
other chemical packing and tray,cleanser bottles….
e) Toys: body of revise pens,gumwater bottles,sand beach
balls,hollow toys(including stationary toys ,collection jars and
big assembled slide ladder…..
f) Other applicable area:tool boxes,pesticide bottles,atomizer,bed
bords, desk bords,basketball bord
Machine specification:
| Parameters | MP70FS |
| Material | PE PP PVC PA… |
| Max container capacity | 10L |
| Number of die | 1,2,3,4,6 |
| Machine Dimension(LxWxH) | 3.7x2.3x2.5m |
| Total weight | 8ton |
| Clamping force | 110kN |
| Platen openning stokes | 240-600mm |
| Toggle stokes | 520mm |
| Max mould size(WxH) | 500x400mm |
| Screw diameter | 75mm |
| Screw L/D ratio | 24 L/D |
| (HDPE) Plasticizing capacity | 75kg/h |
| Screw heating zone | 3 zone |
| Screw heating power | 12kw |
| Screw fan power | 0.14kw |
| Extrusion motor power | 22kw |
| Die head heating zone | 3 zone |
| Power of die heating | 9.1kw |
| Total power of machine | 58.2kw |
| Power of oil pump motor | 15kw |
| Air pressure | 0.6-0.8 Mpa |
| Average energy consumption | 32kw |
| Consumption compression air | 1.5m³/min |
| Consumption cooling water | 50L/min |
Defleshing system type:Push on top and bottom with air cooling
system.
