HDPE Extrusion Blow Molding Machine MP55D for Medical Water Bottle
Introduction:
MP55D is specifically designed for making bottles from 5ml up to
maximum 1L. It is hydraulic driven with accrate eletrical control
system. MP55D has double stations to increase the production
efficiency. Also, it has variety of choice of die heads. With more
than 10 years of success in the market, MP55D is updated to be one
of the most reliable and popular model in the world.
Advantages:
EXTRUSION DIE HEAD: HIGHLY EXPERIENCED MULTI-CAVITY AND MULTI-LAYER
TECHNOLOGY
Adopting with latest die head design, MEPER focuses on providing
high quality and high precision self-manufactured extrusion die
heads for customers.
The following should be abided by in order to keep safe operation,
machine’s performance and service life.
3.2.1 Safety rules should be followed in operating the machine:
1) Do not start the machine before knowing its features and
operating procedure .
2) Before each operation, check the reliability of safety switches
and safety doors. Do not start machine before confirming all safety
devices are perfect and effective.
3) Do not randomly touch moving, heating and energizing parts
during running. Do not stretch out into mold clamping device. Do
not stretch out head. Stop oil pump motor and switch off power in
repair. Be ware of hot material barrel!
4) Two personnels are forbidden to operate one machine at one time
except in installing mould.
Specifications:
| MP55D |
| Double station blow molder with horizontal linear mould shuttle |
| | |
| Length: | 2870mm |
| Width: | 2140mm |
| Height: | 2280mm |
| | |
| Key Data | | MP55D | | |
| | mm | | |
| Linear mould stroke | A | 380 |  |
| Mould Width | B | 360 |
| Mould Length | C | 300 |
| Mould Thickness | D | 130 |
| Opening Stroke | E | 220 |
| | | |
| Platen Daylight | D+E | 350 | | |
| Clamping Force | | 30kN | | |
| Centre Distance | 2x2 fold | 130 | | |
| 2x3 fold | 90 | | |
| 2x4 fold | 75 | | |
| 2x5 fold | 60 | | |
| 2x6 fold | 50 | | |
| | | | |
| Extruder | | φ55 | φ60 | φ65 |
| Screw Speed | r/min | 0~65 | 0~65 | 0~65 |
| Screw Diameter | mm | 55 | 60 | 65 |
| Screw L/D Ratio | L/D | 24 | 24 | 24 |
| | | | |
| Energy Requirements | | | | |
| Extruder Inverter Power | kW | 11 | 15 | 18.5 |
| Extruder Moter Power | kW | 11 | 15 | 18.5 |
| Srew Heating Power | kW | 5.85 | 9.4 | 12.3 |
| Fan Power | kW | 0.14X2 | 0.14X2 | 0.14X2 |
| Oil pump Motor Power | kW | 7.5 | 7.5 | 7.5 |
| Total Power of Machine | kW | 33.34 | 40.92 | 47.29 |
| Air Requirement approx | m3/min | 0.8-1 | 0.8-1 | 0.8-1 |
| Air Working Pressure | Mpa | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 |
| | | | |
| Cooling Requirements | | | | |
| Consumption Cooling Water | L/min | 30 | 30 | 30 |
